72" LEATHER BELT SINGER TREADLE SEWING MACHINE - 1/4" (6mm) ROUND B109
ITEM: Leather Treadle Belt – 1 each new, round 1/4” (6 mm) diameter
for many Singer Treadle Sewing Machines. These Superior-Quality
Belts are principally used in connection with the wonderful, old
Singer Cabinets and Manual Rocking-Foot Pedals.
Each belt comes with the metal hook/connector attached to one end.
SIZE: 72 inches (183 cm) long & 1/4" (6 mm) diameter
DESCRIPTION: Please note that virtually all Treadle Sewing Machines use a belt that
is approximately 66” (167.5 cm) long & 3/16” (5 mm) in diameter.
This Belt is 1/4" (6 mm) in diameter (slightly thicker than the usual belt used).
Simply measure your old belt (if available) against this new belt
(or measure the length required with a piece of string),
cut the excess length off, puncture (using an awl or nail) the newly-cut
end with a hole approximately 1/4” (6 mm) from the end, insert the
end of the metal hook/connector, test for fit, and finally, bend the
hook/connector ends to “clamp” them down against the belt.
Please note that we also offer these Leather Treadle Belts
in the following diameters:
1/8” (3 mm) 3/16” (5 mm) 1/4” (6 mm)
9/32” (7 mm) 5/16” (8 mm) 3/8” (10 mm)
FITS: Virtually all Treadle Sewing Machines including:
Singer Treadle Singer 14K